Common Rail & PD Diesel ECU up to 8 cylinders Truck engine 24V system
DID1 is an engine control unit for common rail diesel engines with up to 8 cylinders equipped with solenoid injectors. It is also capable of driving unit injectors as well as some spill valve controlled injection pumps.
Notable hardware features:
- 8 injector outputs For commonrail en pump injectors
- 11 configurable low-side switch outputs 7 of which are PWM capable.
- 14 0-5V analog inputs
- 5 general purpose digital inputs Not counting crank/cam sensor inputs.
- 1 K-type thermocouple input Measurable range 0 to 1350◦C
- On board barometric pressure sensor
- 8 GB On board data logging memory Capable of recording data at up to 1000Hz on selected channels or every channel simultaneously at up to 500Hz. Real time clock for log time stamps.
- 2 CAN 2.0B interfaces Capable of sending and receiving arbitrary data as well as serve OBD2 over CAN. Data rates configurable up to 1Mbps.
- LIN bus interface For control of turbocharger actuators and other devices relying on LIN networking.
- 1 Analog output 0-5V mappable to perform any function, perfect to provide a throttle or engine torque signal to transmission controllers or other devices not CAN-enabled.
- DID1 ECU
- 2 metre long USB cable
- 2x injectordriver box and part wire loom injectors
- 1x Trottle peddle
See product's user manual for more information or contact us with any questions before ordering.
Controller comes with a 2 year warranty.